The remote control functions include: remote control on/off, fault reset, emergency shutdown, and ATS primary and backup switching units.
The telemetry functions include: three-phase output voltage, three-phase output current, output frequency/speed, temperature of the cooling medium or cylinder block (air-cooled), oil pressure of the lubricating oil, oil temperature of the lubricating oil (air-cooled), starting battery voltage, output active power, reactive power, power factor, operation time, etc.
The remote signaling functions include: working status (running/off), working mode (automatic/manual), main and standby units, overvoltage, undervoltage, overcurrent, high frequency/speed, high water temperature (water-cooled), high cylinder block temperature (air-cooled), belt breakage (air-cooled), high lubricating oil temperature (air-cooled), start-up failure, overload, charger malfunction, etc.
Programmable input/output port
In case of any malfunction, automatically call the duty room or the on-duty person’s Pager
Fault storage and query: up to 32 people’s fault records can be kept and cleared.
The functions of the remote intelligent monitoring system screen
Manual control panel (optional configuration for the unit)
It provides the basic start/stop function of the unit and has the following basic configuration and functions:
Start/Stop controller
Three-phase AC ammeter
Voltmeter and selector switch
Frequency meter/water temperature meter/oil pressure meter/battery voltmeter
Emergency stop button
Alarm function levels: overspeed, high water temperature, high oil temperature, low oil pressure
Maintenance functions: low oil pressure, high water temperature, high oil temperature, overspeed emergency stop and other preset maintenance
Self-starting screen making without mains power (undervoltage)
This control panel, in addition to the standard functions and configurations of a manual control panel
Manual/Stop/Manual function selection
Start-up delay (3-5 seconds, adjustable)
Shutdown delay (0-270 seconds, adjustable)
It starts automatically three times
Alarm indication: Low/overspeed, fault, low oil pressure, overcurrent, start-up failure, high water temperature, high oil temperature warning, power failure and stop
Maintenance functions: low/overspeed, start-up failure, low oil pressure, water over-temperature, oil over-temperature, overcurrent
Mains power charger
When there is mains power, the float charging of the battery can be stopped
Fully automatic remote monitoring screen making
The LCD display screen shows the operation steps, status, faults and various parameters of the unit. It is equipped with RS232 or 485 interfaces for remote control and remote measurement
Remote signaling function
Unit maintenance: The machine will automatically shut down and sound an alarm under the following conditions:
Failure to start, overspeed, low speed, high water temperature, low oil pressure, no signal from the speed sensor, charging problems, etc.
For more questions about the generator set, please call the Beidou Power team. More than ten years of professional production and sales of power generation equipment experience, more professional engineer team to serve you, choose Beidou power is to choose rest assured, welcome on-site factory inspection.
Post time: Dec-31-2025