Diesel generators require long-term use, long deployment times, and maintenance. In order to maintain the performance of the generator set, the generator must be kept in good condition. When refueling, place the engine in a horizontal position and pay attention to changes in the generator oil level. Generators use multi-viscosity oils. Multi-viscosity oils have a wide range of appropriate operating temperatures and therefore consume about 30% less than short-viscosity oils. After refueling, wait for a while to see the oil level of the generator oil gauge. In other words, the oil level seen after the oil flow into the pan is the correct value. The clean oil plus oil performance rating on each oil filter represents the oil additive level prior to installation on the engine. By simply selecting an adequate level of oil to service the generator, the generator can be stably protected throughout the oil replacement cycle. The next time you check the generator, add coolant before starting. When refueling, open the exhaust valve of the upper engine cooling system and slowly place the coolant into the engine at the coolant water inlet until the exhaust valve is no longer foamy. Do not pour coolant under the neck of the bucket in the cooling tank. Fill it. After cleaning the whole generator, the long-term configuration of the generator, easy to accumulate dust, diesel slag affect the normal operation of the generator, so it is necessary to regularly clean the style, cell, etc., regular boot check. Ensure the normal operation of the generator.
Post time: May-10-2023