In case of emergency, in order to ensure the normal production and operation of the enterprise, the backup generator powered by diesel engine is the best backup power solution. Backup diesel generators will continue to power you while your business is down. For the construction site constructed on site, the standby diesel generator can always maintain a stable and reliable power supply on site to ensure the smooth progress of the project.
Backup diesel generators are generally very reliable and prone to sleep for long periods of time between uses. However, this is not the case with the fuel used in generators. If diesel generators don’t get clean and filtered fuel, there will be a lot of problems.
To learn more about how to avoid such problems, this article presents three useful tips to optimize the performance of backup diesel generators while avoiding the worst-case generator problems.
1. Store fuel correctly.
Diesel must be stored properly to avoid unnecessary evaporation and to prevent contamination by debris and airborne substances. Impurities in the fuel can quickly clog the generator’s filter. This in turn restricts the flow of diesel fuel, causing other parts of the engine and generator to overheat. Finally, dirty fuel can shut down the generator completely.
This is another seriously problematic substance that can cause serious damage to engines in generators. If water accumulates in the fuel source, generators often experience difficulty starting and poor operation. This can also lead to corrosion inside the generator. Corrosion increases particle flow through the generator, thereby accelerating overall wear. In severe cases, it can also lead to complete failure of certain components. Fortunately, by storing fuel properly, you can avoid physical and water contamination.
2. Use a fuel stabilizer. No matter how well stored diesel is, it cannot escape the fact that diesel is a volatile petroleum derivative. It will continue to have chemical reactions for some time. Phase separation is the most common change. These different components of diesel fuel are divided into different layers.
The more diesel engine failures, the more problems will arise when the generator is put into use. Fortunately, the use of fuel stabilizers can extend the life of a diesel engine. As the name suggests, these improve chemical stability — keeping your gas fresh for at least a few months.
3. Fuel replacement.
To prepare for a power outage, your tank must be full of diesel. In fact, many people have four or five fuel tanks for safety. Make sure each tank has the date on it. In this way, you can monitor the life of the diesel to keep it within the specified life of the specific fuel stabilizer.
Always use the oldest diesel first to make sure it doesn’t go to waste. If the diesel is close to the limit, it should be used up and refilled as soon as possible. That way, you still get the cleanest diesel from every tank.
Backup diesel generators will provide the results you need if there are sufficient fresh fuel reserves.
Post time: Jun-15-2022