Tank storage orientation prevents fire. The fuel tank or drum should be separately placed in a visible place, away from the Volvo diesel generator, and smoking is strictly prohibited. If users manufacture their own fuel tanks, they should pay attention to the spare Volvo diesel generator fuel tanks made of stainless steel or steel plates, and do not paint or galvanize the fuel tanks, as they will react chemically with the diesel and produce impurities that may damage the generator set, reducing the quality, cleanliness and incineration power of the diesel.
After the oil tank is placed, the oil level shall not be higher than the base of the Volvo diesel generator. 2. If the oil level of the large tank is higher than 2.5m, the daily oil tank shall be added between the large tank and the Volvo diesel generator, and the direct oil feeding pressure shall not be more than 2.5m. Fuel is not allowed to flow into the diesel engine through the intake or injection lines, even when the Volvo diesel generator is shut down.
The resistance at the oil port shall not exceed the regular values on all Volvo diesel generator performance data sheets when using clean filter elements. This drag value is based on half the fuel in the tank. The end direction of the fuel supply pipe of the fuel tank shall be approximately 50MM higher than the bottom of the fuel tank of the Volvo diesel generator to avoid sediment and water being sucked into the fuel supply pipe.
The connection of the fuel return line shall not cause fuel shock in the Volvo diesel generator tubing. The fuel capacity in the tank should be guaranteed for daily supply. The fuel supply and return areas of Volvo diesel generator tanks shall be provided with perforated partitions to reduce heat exchange.
Post time: Oct-13-2022