Company News
-
The lubrication system of the generator set
The main function of engine lubricating oil is to reduce friction and wear by providing a long-lasting protective oil film between the moving parts of the engine, and at the same time prevent corrosion on the surfaces of each component. High-temperature cylinders and bearings are highly dependent...Read more -
How to do a good job in noise reduction for generator sets
We all know that when a generator is in operation, it will produce a large amount of noise. The noise level at a distance of 1 meter from the unit can be as high as 113 decibels. It will also emit a certain amount of high-temperature waste gas, containing a small amount of toxic and harmful combu...Read more -
Bad starting habits of diesel generators should be eradicated
Due to the uneven and inconsistent operation levels of operators, especially during the starting of diesel generators, there are many bad habits, which are manifested as follows: 1. Starting without water: After a diesel generator catches fire, adding cooling water can easily cause the bo...Read more -
How to improve the power factor of diesel generator sets
During the usage process, we merely ensure the normal and stable operation of the diesel generator set without giving more consideration to how to improve its working performance through some data changes. In fact, the power factor of the diesel generator set plays a crucial role in the entire po...Read more -
The reasons for the high oil consumption of diesel generator sets
Engine oil usually enters the combustion chamber through the gap between the piston rings and the ring grooves, as well as the gap between the valves and the guide tubes. The direct cause of its intrusion is that the first piston ring, near the top dead center, has a sharp decrease in its movemen...Read more -
Simple and direct usage tips for extending the service life of generator sets
Working at low temperatures will aggravate the low-temperature corrosion of diesel engines and produce excessive low-temperature sludge. Working at high temperatures for a long time will accelerate the oxidation and deterioration of engine oil, intensify the gelling phenomenon in the high-tempera...Read more -
Why does the fuel injection pump of a diesel generator set supply too much fuel
The fuel supply volume of the fuel injection pump is excessive due to the adjustment of the fuel injection pump plunger, or the locking screw of the adjusting gear ring is loose, causing the adjusting gear ring to shift, resulting in excessive fuel supply volume of the fuel injection pump. 2. Th...Read more -
11 Inspection Steps before Diesel Engine Test Run
1. Check whether the surface of the unit is clean and tidy; Check if the anchor bolts, flywheel screws and other moving machine parts nuts are loose. If any problems are found, tighten them in time Second, check whether the clearances of all parts are correct, especially carefully inspect whethe...Read more -
The world’s first diesel engine
The world’s first diesel engine was born in Germany in 1893. After the invention of the steam engine, Rudolf. RUDOLF DIESEL, the son of a German leather merchant, showed great interest in the “steam engine” when he was studying at the Technical University of Munich. At the age o...Read more -
How can diesel generator sets be better protected from rain
The rainproof measures for diesel generator sets need to be comprehensively considered from multiple aspects such as protective structure design, material selection, detail handling and daily maintenance to ensure the safe operation of the equipment in rainy days. The following are the specific r...Read more -
The clearance between the sealing bearing and the generator rotor has increased
The temperature of the generator’s sealing oil is high The viscosity of sealing oil decreases as the oil temperature rises. Within the same flow area, to maintain a certain pressure of sealing oil, when the temperature of the sealing oil is high, a larger flow rate of sealing oil is requir...Read more -
The causes of motor vibration
As is well known, the structure of an electric motor consists of both electrical and mechanical parts, and it can also be said to be the convergence point of the two. So, its malfunction should be analyzed from two sides. The causes of motor vibration faults should also be divided into two parts....Read more